50 |
LSP 500 PRO
The operating menu
Entering a network key
If you want to connect the LSP 500 PRO to a WPA2-encrypted wireless network,
you are automatically prompted to enter the network key after having selected
the network from the list of available networks (see page 48) or after having
entered the network name manually (see page 49):
X
Enter the network key using the jog dials that are assigned the following
functions:
Jog dial
Action
Function
MENU
Moves the cursor to the left or right
SLOT 2
Enters a space at the cursor position
SLOT 3
Deletes the character at the cursor
position
MIC
Enters capital letters
AUX IN
Enters lower case letters
USB
Enters numbers and special
characters
X
Press the
MENU
jog dial to confirm the entry of the network key.
The connection to the network is now established. This can take up to a
minute. When the network connection is established, the WLAN icon appears
constantly in the status area of the display panel.
Saving the network key
Once you have selected a network and entered the corresponding network key,
the network key is automatically saved so that the connection can be established
faster the next time. In this case, the following is shown on the display panel
when the network key is entered:
X
Press the
MENU
jog dial to confirm the saved network key and to establish the
connection to the network.
or
X
Turn the
MENU
jog dial to call up the entry mode for the network key and to
enter the network key again.
WPA2 Key