LSP 500 PRO
| 51
The operating menu
Setting the multicast address
In order to be able to operate the LSP 500 PRO from a tablet using the app (see
page 23), both the app and the LSP 500 PRO must be set to the same multicast
address and port. If this is not the case, the LSP 500 PRO cannot be operated from
a tablet.
The default multicast address and port used by both the LSP 500 PRO and
the app is
239.255.12.42 : 1234
If the default multicast address cannot be used in your network environment,
you can change the multicast address and port. Changing the multicast address
and port used by the LSP 500 PRO also requires changing the multicast address
and port used by the iPad app (iPad
Settings
LSP 500 PRO).
To change the multicast address and port:
X
In the
WLAN
menu, turn the
MENU
jog dial until the
MULTICAST
menu item is
displayed.
X
Press the
MENU
jog dial to open the
MULTICAST
menu item.
X
Configure the multicast address and port using the jog dials that are assigned
the following functions:
Jog dial
Action
Function
USB
Enters numbers from 0 to 255 (address)
or from 0 to 65535 (port)
MENU
Switches between the 4 number blocks
of the multicast address and the number
block of the port
X
Press the
MENU
jog dial to store the new multicast address and port.
Multicast
