Putting the devices into operation
12
SK 100 G3 bodypack transmitter
Inserting the batteries/accupack/Charging the accupack
The procedure is the same as for the EK 100 G3 diversity receiver:
To insert the batteries/accupack:
#
Read the chapter “Inserting the batteries/accupack” on page 10.
To charge the accupack:
#
Read the chapter “Charging the accupack” on page 10.
Connecting the microphone cable/line cable
The audio input is designed for the connection of condenser microphones. DC powering of the
condenser microphones is via the audio input
MIC
/
LINE
!
(3.5 mm jack socket).
#
Use one of the recommended Sennheiser microphones or the optional CL 2 line cable.
#
Connect the 3.5 mm jack plug
/
from the Sennheiser cable to the 3.5 mm jack socket
MIC
/
LINE
!
.
#
Lock the 3.5 mm jack plug by screwing down the coupling ring
0
of the cable.
#
Via the operating menu, adjust the sensitivity of the microphone/line input.
Attaching and positioning the corresponding microphones
ME 2/ME 4
#
Use the microphone clip
1
to attach the microphone to clothing (e.g. tie, lapel).
The ME 2 clip-on microphone (shown on the right in the diagram) has an omni-directional
pick-up pattern. It is therefore not necessary to position it precisely.
#
Attach the ME 2 microphone as close as possible to the sound source.
The ME 4 clip-on microphone (shown on the left in the diagram) has a cardioid pick-up
pattern.
#
Position the ME 4 microphone so that its sound inlet is directed towards the sound source
(e.g. mouth).
!
0
/
1
ew 100 P G3 Set _529660_0309_Sp9.book Seite 12 Mittwoch, 8. April 2009 6:57 18
