Sennheiser EK 100 G3, Руководство пользователя

Страница: 10 / 12

Using the devices
20
To transfer the parameters:
#
Switch the transmitter and the diversity receiver on.
#
On the receiver, call up the “ Sync ” menu item.
“ Sync ” appears on the display panel of the diversity receiver.
#
Place the infra-red interface of the transmitter (see page 5 to page 7) in front of the
infra-red interface of the diversity receiver
+
.
The parameters are transferred to the transmitter. When the transfer is completed, “ ”
appears on the display panel of the diversity receiver. The receiver then switches back to the
current standard display.
To cancel the transfer:
Press the ON/OFF button
,
on the diversity receiver.
“ ” appears on the display panel of the receiver. “ ” also appears if no suitable trans-
mitter was found (wrong frequency range/wrong generation).
Deactivating the lock mode temporarily
You can activate or deactivate the automatic lock mode via the “ Auto Lock ” menu item (see
page 23). If the lock mode is activated, you have to temporarily deactivate it In order to be
able to operate the devices:
+
EK 100 G3/SK 100 G3 SKM 100 G3 SKP 100 G3
#
Press the SET
button
&
(EK) or
'
(SK).
#
Press the multi-
function switch
+
.
#
Press the SET
button
*
.
“ Locked ” appears on the display panel.
#
Press the rocker
button
'
(EK) or
(
(SK).
#
Move the multi-
function switch
+
upwards/downwards.
#
Press the
UP button
%
/
DOWN button
&
.
“ Unlock? ” appears on the display panel.
#
Press the SET
button
&
(EK) or
'
(SK).
#
Press the multi-
function switch
+
.
#
Press the SET
button
*
.
The lock mode is temporarily deactivated.
P
+
&
'
'
(
&
*
%
ew 100 P G3 Set _529660_0309_Sp9.book Seite 20 Mittwoch, 8. April 2009 6:57 18