Using the Soundbar
Sennheiser AMBEO Soundbar System SB02 | 53
Configuring the network connection via
WiFi or Ethernet
Use the WiFi connection or the Ethernet connection for:
•
controlling the Soundbar via the Sennheiser Smart Control app
•
streaming via Apple AirPlay, Google Chromecast, Spotify Con-
nect and Tidal Connect
•
activating the Alexa and OK Google voice assistants
•
downloading firmware updates
Establishing a WiFi connection
To establish a WiFi connection:
▷
Press the Setup button on the Soundbar for approx. 5 seconds.
WPS (WiFi Protected Setup) is activated.
The Soundbar searches for a connection.
▷
Press the WPS button on your router.
The Soundbar connects to the WiFi.
▷
Note that the Soundbar has to be on the same network as the
devices with which the Soundbar is to communicate.
Establishing an Ethernet connection
▷
Make sure that the Ethernet cable is properly connected to the
Soundbar and your network (> 34).
Managing a network connection via the Sennheiser Smart Control
app
▷
Tap the
Network
button in the
Settings
menu of the Smart Control
app.
A drop-down list appears.
▷
Depending on the desired connection type, tap the
WiFi
or
Ether-
net
item in the drop-down list.
▷
Adjust the WiFi connection or Ethernet connection as desired.
If you connect the Soundbar to the Internet/Ethernet via cable,
the WiFi function of the Soundbar is automatically deactivated.
If no connection can be established within 2 minutes, the
Soundbar stops searching. If necessary, start the search again.
Router
Setup
Reset
WPS
5s
1
2