Connecting devices to the Soundbar
38 | Sennheiser AMBEO Soundbar System SB02
Connecting/disconnecting the Soundbar
to/from the power supply system
Connecting to the power supply system
▷
Connect the plug of the power cable to the
POWER IN
socket on
the Soundbar.
▷
Connect the power plug of the power cable to a suitable wall
socket.
The Soundbar automatically switches on after being connected to
the power supply.
The LED status bar of the Soundbar lights up white.
Disconnecting from the power supply system
▷
Disconnect the power plug of the power cable from the wall
socket.
▷
Disconnect the plug of the power cable from the
POWER IN
socket on the Soundbar.
ATTENTION
Danger of damage to the product!
If you connect to an unsuitable power supply, the product
can be damaged.
▷
Use a suitable power cable to connect the product to
the power supply system (100 – 240 V, 50 Hz/60 Hz).
PRE OUT
SUB
IN
OPTIC
AL
IN
HDMI 2
IN
HDMI 1
HDMI T
V
(e)ARC
ETHERNET
Setup
R
eset
USB
5
V⎓1A
IN
AUX
L
R
PO
WER IN
The Soundbar does not have to be switched on or off manually.
When the Soundbar is not in use, it automatically switches to
the power-saving ECO mode (> 46). The Soundbar automati-
cally switches on from ECO mode when you start audio play-
back from an audio source.
Alternatively, you can put the Soundbar in standby mode with-
out network connection (> 46).