![background image](http://html1.mh-extra.com/html/sennheiser/ambeo-sb02/ambeo-sb02_manual_1242858052.webp)
Using the Soundbar
52 | Sennheiser AMBEO Soundbar System SB02
▷
Hold your Bluetooth device at a distance of approx. 7.87"/20 cm
to the Soundbar.
▷
Via the menu of your Bluetooth device, start the search for new
Bluetooth devices.
All active Bluetooth devices in the proximity of your smartphone
are displayed.
▷
From the list of found Bluetooth devices, select “AMBEO Sound-
bar”. If necessary, enter the default pin code “0000”.
If pairing was successful, the LED status bar lights up blue.
To establish a Bluetooth connection with the Sennheiser Smart Con-
trol app:
▷
Activate Bluetooth on your Bluetooth device.
▷
Tap the
Network
button in the
Settings
menu of the Smart Control
app.
A drop-down list appears.
▷
Tap the
Bluetooth
item in the drop-down list to open the
Bluetooth
menu.
The
Your Devices
section displays Bluetooth devices that the
Soundbar has already been paired with.
The
Other Devices
section displays unpaired Bluetooth devices.
In the
Bluetooth
menu, you can either pair the Soundbar directly with
one of the listed Bluetooth devices or start the pairing mode.
To pair the Soundbar directly with one of the listed Bluetooth
devices:
▷
Tap one of the displayed Bluetooth devices in the
Your Devices
or
Other Devices
section.
The Soundbar tries to pair with the selected Bluetooth device.
To start the pairing mode:
▷
Tap the
Start Bluetooth Pairing
button.
Disconnecting the AMBEO Soundbar from a Bluetooth device
To disconnect via the Bluetooth device:
▷
Via the menu of your Bluetooth device, disconnect the connection
to the Soundbar.
To disconnect via the Sennheiser Smart Control app:
▷
Tap the
Network
button in the
Settings
menu of the Smart Control
app.
A drop-down list appears.
▷
Tap the
Bluetooth
item in the drop-down list.
▷
Tap the paired device.
▷
Tap the
Disconnect
button to disconnect the desired Bluetooth
device.
If no connection can be established within 3 minutes, the pair-
ing mode is terminated. If necessary, start the pairing mode
again.