Model
iGas Detector CO2
Sensor Type
IR
Measurement
Diffusion type
Display
LCD display
Audible
90dB at 10cm
Warning Lamp
Red Flashing LEDs
Vibration
Vibration Alarm
Battery
Rechargeable Li-ion(polymer) power supply unit (500mAh)
Charging Time
100 minutes from empty battery to fully charge based on
power off state and charging with adaptor
Temperature
-20ºC ~ +50ºC
Humidity
5%~95% RH (Non-condensing)
Case
Rubber Enclosure
Accessories
Calibration Cap, Charge Cable(USB C-Type) and adaptor
Calibration Flow Rate
Flow rate: 400cc (N2, CO2)
Size &Weight
Size: 54(W) x 99.5(H) x 38.8(D)mm, Weight: 120g
Operating Life
14 days(Expected) (in measuring mode without alarm)
Event Log
Recent 30 alarms
Approval
EMC directive(2014/30/EU)
Gas
Measuring range
Low Alarm
High Alarm
Resolution
CO2
0~5.0%vol
0~50000ppm
0.5%vol
5000ppm
1%vol
10000ppm
0.001%vol
10ppm
Sensor Specification
7. Specification
8. Battery Charging
To charge the battery,
- Connect the USB-C type cable with the charging port at
bottom of the device.
- Connect the USB port with a provided adaptor (5V, 1.2A)
- While charging, the backlight illuminates.
- After the full charging, the back light turns off with full
battery symbol.
- In the low battery, the alarm is activated every three
minutes.
Note:
-
The device can still charge by connecting to a PC and the
purpose of connection is not for charging but for linking the PC
program.
18
Содержание iGas Detector CO2
Страница 1: ...Portable Single Gas Detector User s Manual...