WWW.SENIXTOOLS.COM
10
ASSEMBLY
Attaching Side Discharge Cover
Your mower is shipped as a mulcher. To convert to side discharge, make sure the
grass catcher is off of the unit and the rear discharge door is closed.
To attach the side discharge cover:
a. Lift the mulching cover on the side of the mower.
b. Slide two hooks of side discharge cover under hinge pin on mulching cover
assembly (Figure 8).
c. Lower mulching cover. Do not remove side mulching cover at any time, even
when you are not mulching.
To remove the side discharge cover:
a. Lift the mulching cover.
b. Slide two hooks of side discharge cover out.
c. Let go of the mulching cover.
ADJUSTMENTS
Cutting Height
This product is designed with dual-lever height adjustment (Figure 9).
6 cutting heights (from 1.25inch to 3.75inch) are available.
1.
Pull the height adjustment lever outward towards wheel (unit will tend to fall
when lever is moved outward).
2.
Move lever to a position of desired cutting height.
3.
Release lever towards deck.
IMPORTANT:
To avoid unbalance, always keep four wheels at same cutting height.
Figure 8
Figure 9
