Senix HTX2-M, Руководство оператора

Страница: 8 / 68

EN - 8 WWW.SENIXTOOLS.COM
the correct power tool for your
application – The correct power
tool will do the job better and
safer at the rate for which it was
designed.
b. Do not use the power tool if the
switch does not turn it on and
off – Any power tool that cannot
be controlled with the switch is
dangerous and must be repaired.
c. Disconnect the battery pack
from the power tool before
making any adjustments,
changing accessories, or storing
power tools – Such preventive
safety measures reduce the
risk of starting the power tool
accidentally.
d. Store idle power tools out of the
reach of children and do not
allow persons unfamiliar with the
power tool or these instructions
to operate the power tool –
Power tools are dangerous in the
hands of untrained users.
e. Maintain power tools. Check
for misalignment or binding of
moving parts, breakage of parts
and any other condition that may
affect the power tool’s operation.
If damaged, have the power
tool repaired before use – Many
accidents are caused by poorly
maintained power tools.
f. Keep cutting tools sharp and
clean – Properly maintained
cutting tools with sharp cutting
edges are less likely to bind and
are easier to control.
g. Use the power tool, accessories
and tool bits etc., in accordance
with these instructions and in
the manner intended for the
particular type of power tool,
taking into account the working
conditions and the work to be
performed – Use of the power
tool for operations different from
those intended could result in a
hazardous situation.
5) Battery tool use and care
a. Recharge only with the charger
specified by the manufacturer. A
charger that is suitable for one
type of battery pack may create
a risk of fire when used with
another battery pack.
b. Use power tools only with
specifically designated battery
packs. Use of any other battery
packs may create a risk of injury
and fire.
c. When battery pack is not in use,
keep it away from other metal
objects, like paper clips, coins,
keys, nails, screws or other small
metal objects, that can make a