Senix HTX2-M, Руководство оператора

Страница: 11 / 68

11 - EN WWW.SENIXTOOLS.COM
is removed and the moving
hazardous parts have come to a
complete stop.
j. Do not using the machine in bad
weather conditions especially
when there is a risk of lightning.
k. Inspect the area to be cut and
remove any foreign objects
that will influence your cutting.
If the foreign objects can not
be removed, e.g. wire fences,
please mark and remember it
to avoid toughing them during
cutting.
l. Ensure that the hedge trimmer is
correctly located in a designated
working position before starting
the motor.
m. Always ensure that the air vents
are kept clear of debris.
n. If the cutting attachment strikes
any foreign object or the product
starts making any unusual noise
or vibration, switch the product
off, remove the battery, allow
the product to stop and take the
following steps:
– inspect for damage;
– check for, and tighten, any loose
parts;
– have any damaged parts
replaced or repaired with parts
having equivalent specifications.
blades.
d. Hold the power tool by insulated
gripping surfaces only, because
the cutter blade may contact
hidden wiring or its own cord.
Cutter blades contacting a ²live²
wire may make exposed metal
parts of the power tool ²live²
and could give the operator an
electric shock.
e. Keep cable away from cutting
area. During operation the cable
may be hidden in shrubs and can
be accidentally cut by the blade.
f. Remove any blade that has been
damaged. Always make sure that
the blade is installed correctly
and securely fastened before
each use. Failure to do so can
cause serious injury.
g. Service on the product must
be performed by qualified
repair personnel only. Service
or maintenance performed by
unqualified personnel could
result in injury to the user or
damage to the product.
h. Do not overreach and to keep
the balance at all times. Always
be sure of the footing on slopes.
Walk when operating the power
tool, never run.
i. Do not touch moving hazardous
parts before the battery pack