Operation Manual
MMS-1A-RS / MMS-1X-RS
Revision 4.0, September, 2020
Doc Nr: MP.MMS-1A-RS.OM.400.02_E
Page 7/74
4.
Information
Magnetic Field Mapper MMS-1A-RS / MMS-1X-RS is the high-end version of the SENIS Magnetic Field
Mapping Systems. It allows users to perform a fast, high resolution mapping of magnetic flux density around
permanent magnets, electromagnets or electronic circuit boards. The map of the magnetic field can be
presented as color coded 2D or 3D visual displays on a PC screen and as a table of numerical measured values.
Measured data are analyzed in real-time, which provide data analysis capabilities for an advanced inspection,
characterization and quality control of permanent magnets.
Due to unique features of the applied fully integrated 3-axis Hall probe, all three components of the magnetic
field (Bx, By, Bz) are measured simultaneously at virtually same point. The magnetic field sensitive area of the
applied Hall probes is within a 150 µm x 150 µm square, which allows measurements of the homogeneous
and highly inhomogeneous magnetic fields. The mapping system is controlled by an extremely easy-to-use-
software, built on MS Windows platform and LabVIEW. Magnet scanning profiles are fully customizable.
Figure 1: Magnetic Field Mapping System
–
MMS-1A-RS (standard size) and MMS-1X-RS (large-size mapper)
