SCP 2100
– User Manual
Page 11 (62)
1.1 Product Introduction
The SCP 2100 is a Signal Collection Platform used as a turnaround product capable of
receiving a transport stream from the following interface types:
1) ASI
2) IP
3) RF
– 8VSB (2101 Model)
The SCP 2100 can then convert these input types to IP or Zixi output. This unit is fully
controllable through the web interface to perform tasks such as setup, monitoring, and
troubleshooting
This manual describes how to install, configure, and operate the SCP 2100 Signal
Collection Platform.
This receiver is also backed by Sencore’s best-in-class staff of
ProCare support engineers.
1.2 Front Panel Overview
The SCP 2100
’s physical IP addresses can be controlled from the front panel using the
LCD screen and buttons that are shown below. A description of using the front panel
can found in Section 3.1.
Figure 1: SCP 2100 Front Panel
1. Input Indicator
2. Error Indicator
3. LCD Screen
4. Up, Down, Left and Right Buttons
5. OK and ESC (escape) Buttons
3
2
4
5
1
