SCP 2100
– User Manual
Page 42 (62)
Configuring Date / Time
Figure 27: Date and Time Menu
The SCP 2100 can be set to synchronize with an NTP server or manually setting the
date and time. Click the
icon to begin. These values are used to
timestamp entries in the Alarm and Event logs under the Reporting tab.
Setting
Range
Description
Update Mode
NTP
Manual
Setting to
NTP
uses an NTP server to set and
synchronize the date and time.
Manual
allows the
user to define a date and time.
NTP Server
Four decimal octets:
XXX.XXX.XXX.XXX
Domain Name
This is the IP Address or Domain Name of the
NTP Server. This setting is only available if
Update Mode is set to NTP.
Date
YYYY/MM/DD
This setting is the manually defined date. A
calendar widget can be used to select the data by
clicking the
button. This setting is only
available if Update Mode is set to Manual.
Time
00:00:00
– 24:00:00
This setting is the manually defined time. The
time is based on a 24 hour clock. This setting is
only available if the Update Mode is set to
Manual.
Time Zone
-12:00:00 ~
+13:00:00
Applies a time offset to the value obtained from
the NTP server
