Sencor SRC 190, Руководство пользователя

Страница: 7 / 14

EN - 6
begins to scan. Release the button. The tuner will stop on the fi rst strong
station it fi nds.
MANUAL SEARCH FOR RADIO STATIONS
1. Tap the unit (2) and (3) button repeatedly to choose your desired radio
station.
2. Tap the unit (6) and (7) button to set the desired volume level. The
volume level reading will appear in the LED DISPLAY.
Notes:
• Use manual tuning to select weaker stations that might be skipped
during automatic tuning.
• If the automatic tuning does not stop on the exact frequency of the
station, for example, it stops on 88.9 MHz instead of 88.8 MHz, use
the manual tuning method to “
fi ne tune” to the exact frequency of the
desired station.
HINTS FOR BEST RECEPTION
To insure maximum FM tuner reception, unwrap and fully extend the
EXTERNAL FM WIRE ANTENNA for best FM radio reception.
TO SET/RECALL RADIO STATION PRESETS
1. Press the unit button (2) and (3) select the desired radio station.
2. Press and hold the unit button (5) the next available preset memory
number will fl ash on the LED display. (Note: “P01” will fl ash in the
display if you are programming presets for the fi rst time.)
3. Press the unit button (2) and (3) to change to the desired preset number
P01 thru P10.
4. Repeat steps 1 through 3 to preset up to10 FM stations.
5. To recall one of the preset stations already programmed, Press the unit
button (5) repeatedly until you reach the desired preset number/radio
station.
SETTING THE ALARMS (AL1 AND AL2)
You can select either a Beeper Alarm or the FM Radio as the alarm source.
The setting sequence for ALarm is as follows: