Sencor SRC 190, Руководство пользователя

Страница: 11 / 14

EN - 10
ALTERNATE DISPLAY BETWEEN TIME AND
TEMPERATURE MONTH-DATE DISPLAY
1. In radio off mode, press and hold the unit button (2) for about 3 seconds
until “ON” appears in the LED DISPLAY.
2. The DISPLAY will alternate between the current Time for 10 seconds
and month- date for 5 seconds and temperature for 5 seconds as
follows:
TIME
Indicator
MONTH
Indicator
DAY
Indicator TEMPERATURE
Indicator
Display for 10 second Display for 5 second
Display for 5 second
To cancel this function, press and hold the unit button (2) for about 3
seconds until “OFF” appears on the LED DISPLAY. The DISPLAY will switch
back to normal time display.
Note:
If you replace the battery, do not disconnect AC plug from AC outlet.
Otherwise, current time and alarm will be initialized.
RESETTING
If the system does not respond or exhibits erratic or intermittent operation,
you may have experienced an electrostatic discharge (ESD) or a power
surge that triggered the internal microcontroller to shut down automatically.
If this occurs, simply disconnect the ac power cord and remove the system
backup battery, wait for at least 3 minutes and then setup the unit again as
if it is a brand new unit.