Sencor SRC 190, Руководство пользователя

Страница: 5 / 14

EN - 4
Note:
The unit will operate without a battery installed but your time & alarm setting
and radio presets will be lost and will have to be reset in the event of power
interruption or failure.
IMPORTANT:
Be sure that the battery is installed correctly. Wrong polarity may damage
the unit and void the warranty. For best performance and longer operating
time, we recommend the use of good quality alkaline battery.
AC POWER CONNECTION
Plug the AC power cord into a household outlet AC source.
SETTING THE CALENDAR AND TIME
1. In standby mode, press and hold the Time set button (5) for about 2
seconds to enter the calendar/time set mode.
2. The year indicator will fl ash on the LED DISPLAY for up to 30 seconds
prompting for a new entry.
3. While the display is fl ashing, repeatedly tap the unit buttons (2), (3) to
adjust to the correct year. Press and hold the unit (2), (3) button faster
scanning backward or forward. Tap the unit button (5) to con
fi rm.
4. Repeat steps #2 to #3 to adjust the month, day, time format, current
hour and fi nally current minute in the same way.
Notes:
The display sequence in calendar / time set mode will be as follows:
Year → Month → Date → 12/24 Hour Time Format → Real Time Hour
→ Real Time Min → Normal Time
To check the year while current time is displayed, tap the unit button (2)
once. The LED DISPLAY will change to
year display for 5 seconds and then
revert to current time automatically.
To check the date while current time is displayed, tap the unit button (2)
twice. The LED DISPLAY will change to date display for 5 seconds and then
revert to current time automatically.