EN-8
EN
Stick Blender
SHB 5501CH
Copyright © 2019, Fast ČR, a.s.
Revision 06/2019
ASSEMBLING AND DISASSEMBLING THE APPLIANCE
•
Before you start assembling or disassembling the appliance, check that the motor unit A
3
is turned off and
disconnected from the power socket and that the rotating parts have come to a complete stop. Parts that are
connected to the motor unit A
3
, must be thoroughly dry.
Stick blender
1. Attach the stick blender attachment A
5
from underneath to the motor unit A
3
. The connection of both parts
is indicated by a click.
2. Blend food in the beaker A
6
or in another suitable container intended for coming into contact with food. The
anti-slip base pad A
qd
also serves as a lid for the beaker A
6
, when you wish to use it for short term storage of
food.
3. During disassembly, press and hold down the button A
4
and at the same time remove the stick blender
attachment A
5
from the motor unit A
3
.
Chopper
1. Place the bowl A
9
into the anti-slip base pad A , and on to the central pin at the bottom of the bowl A
9
seat
the blade assembly A .
2. Close the bowl using the lid A
8
, whilst ensuring that the blade assembly shaft fits into the middle part of
the lid A
8
and that the safety locks along the sides of the lid A
8
slide into the safety system of the bowl A
9
.
Turn the lid A
8
clockwise all the way. This will secure it in place, and is indicated by a click.
3. Place the motor unit A
3
into the hole in the lid A
8
and gently push it down until a click is heard. Now the
chopper is assembled.
4. During disassembly, press and hold down the button A
4
and at the same time remove the motor unit A
3
from lid A
8
. Then continue in reverse sequence to the assembly of the chopper.
Hand mixer
1. Slide the beaters A into the holder A
7
, until they click in. Before use, always check that the beaters A are
securely attached.
2. Attach the holder A
7
with the beaters A from underneath the motor unit A
3
. Attachment is indicated by
a click.
3. Blend the food in the beaker A
6
or in another suitable container intended for coming into contact with food.
The anti-slip base pad A
qd
also serves as a lid for the beaker A
6
, when you wish to use it for short term storage
of food.
4. During disassembly, press and hold down the button A
4
and at the same time remove the holder A
7
with the
beaters A from the motor unit A
3
. Then continue in reverse sequence to the assembly of the hand mixer.
Grater
1. With blades facing upwards, insert the grating blade A , A
ws
or A
wd
into the holder A
qk
and push it down
slightly until a click is heard and the cutting blade slides into the holder A
qk
. Seat the shaft of the holder A
qk
on
to the central pin at the bottom of the bowl A
ql
.
2. Cover the bowl A
ql
using the lid A
qj
, whilst ensuring that the safety locks along the sides of the lid A
qj
slide
into the safety system of the bowl A
ql
. Release the safety button located on the grip of the bowl A
ql
, and turn
the lid A
qj
clockwise all the way. Release the safety button. This will secure the lid A
qj
in place. Place the bowl
A
ql
into the anti-slip base pad A
w;
.
3. Place the motor unit A
3
into the hole A and gently push it down until a click is heard. Insert the pusher A
into the feed tube A . Now the grater is assembled.
4. To disassemble proceed in the reverse sequence. To take off the motor unit A
3
it is necessary to first press and
hold the buttons A
4
. This will release the attachment, and the motor unit A
3
can be taken out of the hole A
. Before removing the grinding blade A , A
ws
or A
wd
from the holder A
qk
, first release it by pushing down
slightly on the latch from underneath the grater.
