EN-4
EN
Stick Blender
SHB 5501CH
Copyright © 2019, Fast ČR, a.s.
Revision 06/2019
• Be especially careful when handling hot foods and liquids. Hot
steam or splashing hot foods and liquids may cause scalding. For
reasons of increased safety, allow hot foods and liquids to cool
down to at least 45 °C before blending.
• Always use the supplied pusher to push ingredients through the
feed tube. Never use your hands or other items.
• The operating time of the appliance is 1 minute. Before
turning it on again, allow it to cool down for at least
3 to 5 minutes. When using the appliance to blend sticky
or harder foodstuffs, interrupt operation already after
30 seconds.
• Do not turn on the appliance when it is empty. The incorrect use
of the appliance may negatively affect its lifetime.
• Always turn off the appliance and disconnect it from the power
socket if you will not be using it and if you will be leaving it
without supervision, before assembly, disassembly, cleaning and
before moving it.
• Check that the motor unit is turned off, disconnected from the
power socket and that the rotating parts have come to a complete
stop before disassembling the appliance into its individual parts.
• When handling the grating blades, blade assembly of the stick
blender or chopper, especially when removing the grating blades
or blade assembly, when emptying the bowl and cleaning it, take
special care to avoid injury by the blades.
• Do not submerge the motor unit and its power cord in water or
any other liquid, or wash these parts under running water.
• Ensure that the power plug contacts do not come into contact
with moisture. Do not place heavy items on the power cord.
Make sure the power cord does not hang over the edge of a table
or that it is not touching a hot surface.
