Stick Blender
SHB 5501CH
EN
EN-11
Copyright © 2019, Fast ČR, a.s.
Revision 06/2019
CLEANING AND MAINTENANCE
•
Before cleaning it, make sure that the appliance is turned off, disconnected from the power socket and that the
rotating parts have stopped.
•
Disassemble the appliance into its individual parts. Thoroughly wash the used accessories using warm water
and neutral kitchen detergent. Then rinse them with clean water and allow them to dry naturally or dry them
out thoroughly using a wiping cloth. Clean parts A
7
, A
8
and A , which are equipped with a gear system,
only using a dampened cloth. Take care that water does not enter into these parts. When cleaning the stick
blender attachment A
5
, do not submerge the top end that connects to the motor unit A
3
. The beaker A
6
,
and bowls A
9
and A , the anti-slip base pad A
qa
, A and A
w;
, the beaters A , the blade assembly A
0
,
holder A
qk
and grating blades A –
wd
can be washed in a dishwasher. Other parts are not intended for washing
in a dishwasher.
•
After finishing using the stick blender, it is possible to clean the stick blender blade assembly A
5
by submerging
it in warm water with kitchen detergent, and running it for a short time. Then disconnect the appliance from the
power socket, disassemble it, and rinse the blade assembly with clean drinking water and dry it thoroughly.
Attention:
When cleaning the grating blades A –
wd
and the blade assembly of the stick blender A
5
or
chopper A , be especially careful not to injure yourself on the blades.
•
To clean the outer surface of the motor unit A
3
, use a cloth lightly dipped in a weak detergent solution. After
applying the detergent solution, wipe the surface with a cloth lightly dampened in clean water and then wipe
dry.
•
Never submerge the motor unit A
3
or the power cord in water or in any other liquid. Do not use solvents,
abrasive cleaning products, etc. for cleaning the appliance. Otherwise the surface coat of the appliance may be
damaged.
STORAGE
•
When not using the appliance, store it in a dry place out of children's reach.
TECHNICAL SPECIFICATIONS
Rated voltage range .........................................................................................................................................................................220–240 V
Rated frequency ...................................................................................................................................................................................50/60 Hz
Rated power input .................................................................................................................................................................................1 200 W
Electrical shock protection class ....................................................................................................................................................................II
Noise level .............................................................................................................................................................................................. 61 dB(A)
The declared noise emission level of the appliance is 61 dB(A), which represents a level A of acoustic power with
respect to a reference acoustic power of 1 pW.
Explanation of technical terminology
Safety class for electrical shock protection:
Class II – Electrical shock protection is provided by double or heavy-duty insulation.
Changes to text and technical parameters are reserved.
