19
18
Simple recording
Load a cassette with its safety tab in
place
(see page 25).
Press to start your recording.
Press if you want to stop the
recording for a short while.
Press to continue recording.
Press to stop your recording.
Press
PR+
or
PR-
to choose the
station you want to record.
Press
SP/LP
if you wish to double
the length of the cassette’s recording
time.
For example, on an E-240 cassette you can
record for up to four hours when SP is
displayed, or up to eight hours when LP is
displayed.
STOP SP PR01 ARD
STEREO ON
VCR
VCR
VCR
These buttons are used
on the following two
pages.
One-touch recording-OTR
VCR
Press
PR+
or
PR-
to choose the
station you want to record.
Every time you press , the recording time will increase by 30
minutes. It is possible to record for up to 10 hours if there is
enough room on the cassette.
•
To cancel OTR
press and hold the
STOP
button for about five seconds until the video
stops recording.
• If you want to record from other equipment that is connected to your video, see pages 3,
4, 5 and 9.
Recording cassettes
◆
If you want to use the video’s timer to record a programme, the clock, date and stations must be set correctly.
◆
Load a cassette with its safety tab in place (see page 25) and with enough free tape for the recording.
VCR SETUP
CLOCK SET
LANGUAGE SET
RF OUTPUT SET
16:9 SET
OSD ON/OFF
PR+/-:SELECT
OK:CONFIRM MENU:END
OSD ON/OFF
ON
OFF
PR+/-:SELECT
OK:CONFIRM MENU:END
OSD(On Screen Display) ON & OFF
This VCR is set to “OSD (On Screen Display) ON” mode at the factory, but you can change
it to OFF mode. When a function is changed at the front display or remote control the
change will be displayed on the screen.
Press
MENU
.
Choose “VCR SETUP”
And press
OK
.
Choose “OSD ON/OFF”.
If you want OSD OFF mode, press
PR-
and press
OK
.
OSD characters will not be displayed in the normal
picture at the start of each mode change.
1
2
3
MAIN MENU
TIMER PROGRAM
PR PRESET
VCR SETUP
TAPE CONTROL
PR+/-:SELECT
OK:CONFIRM MENU:END
