EN
2 EN
Copyright © 2014, Fast ČR, a. s.
Revision 03/2014
Important instructions:
Your outdoor phone is designed and tested for outdoor use, with
the protection level reaching IP67, and is completely resistant to
dust (6.) and has protection against its complete immersion into
water, lasting up to 30 minutes and 1 m deep (7.). Make sure to
use all types of phone protection (covers and plugs) and not put
excessive mechanical load on the frame or parts of the phone (pull,
push – also liquids, twist, impacts), which could result in violating
the cohesiveness of the exterior case and moving part seals. Moving
parts and components accessible by the user (SIM and SD card
plugs) shall only be opened in dry environments. The warranty does
not cover moisture, leaking and dustiness, resulting in the failure
to adhere to these conditions, as well as visible damage caused
by using the device. Nevertheless, if an undesirable effect of this
nature occurs, or you have even the slightest doubt about the leaks,
switch the phone off and allow it to sit in a room, dry and warm
environment for several hours (not on sources of heat or radiators) in
the open state – headphone and charging jack plugs and SIM card
area cover. A hard power off is performed by pressing the RESET
button on the side of the phone, this button shall be pressed strongly.
The button needs to be pressed with force to distinguish undesired
pressing action during standard use. If the phone's operation is not
restored to its previous fl awless state, even after many hours of
“drying”, send it to professional repair shop for drying and cleaning. If
the undesired effect described above takes place due to a liquid other
than water penetrating the device, do not attempt to restore phone
operation and have the device cleaned professionally; i.e. effects
resulting from contamination by mixtures and colloids, such as pop
or contaminated waters (may develop undesired conductive paths)
or caustic and volatile liquids (cleaning agents and solvents, can
break up conductive connections). Do not modify and replace sealing
elements (plugs and covers) yourself. Have a professional repair shop
help with this. Otherwise you could reduce the level of protection (IP)
or completely eliminate any of the device's protection. If you discover
deviating functionality or conditions of sealing elements – cracks
due to excessive loading, violating cohesiveness due to the external
environment, for example by solvents or oils, or by wearing showing
signs of increased stiffness or cracks – have these replaced for new
pieces by a professional repair shop also.
Prevent damage and use the phone correctly. It will reward you with
long-term reliable operation.
Sencor_P430 5j.indb 2
3.3.2014 9:55:04
