EN
Getting started
EN 29
Copyright © 2014, Fast ČR, a. s.
Revision 03/2014
4. Once you are fi nished charging the phone, unplug the
connector from the phone and unplug the charger from
the socket. Seal the connector cover cap back on tightly to
maintain resistance against dust/water.
Note:
If the battery is fully depleted, you will not be able to switch
the device on immediately after connecting it to a charger.
Allow the battery to charge for several minutes before
attempting to power on the device.
For best charging results and battery service life, charge the
battery non-stop until full (100 %), and discharge until you
receive the fi rst low battery notice. Only then should you
recharge the battery.
Battery protection
Battery information:
Do not place the mobile phone in places with extremely
high or low temperatures. This leads to the battery life being
reduced. The battery life of the mobile phone is limited. Should
the capacity of the phone battery decrease after using the
device over a period of time, we recommend purchasing a new
battery from an offi cial supplier and replacing it.
Achieving maximum battery life
Information about battery use:
• Do not attempt to dismantle or modify the battery.
• Do not attempt to unplug or charge the battery any other
way than specifi ed and with the proper charger.
• Do not expose the battery to hard impacts or attempt to
open the battery with hard objects.
• Stop using the phone immediately, should you discover
a crack on the battery, hole in the battery cover of other
damage, including leaking electrolyte.
Sencor_P430 5j.indb 29
3.3.2014 9:55:07
