| 37 |
12 Warranty
The power tools placed on the market and distributed
by
Kyocera Senco
take into account the regulations
of the laws concerning engineering tools and
equipment to protect against risks to health and
safety.
We guarantee the perfect quality of our products and
accept the costs of subsequent repairs by replacing
the damaged parts or replacement
with a new tool in case of design, material and/
or manufacturing errors within the warranty period.
The warranty period for commercial use is 12 months.
The following are prerequisite for a warranty claim
due to design, material and/or manufacturing errors:
1.
Proof of purchase and compliance with the
instruction manual
A mechanically produced original copy of a
purchase voucher must always be submitted in
order to make a warranty claim. It must contain
the complete address, date of purchase and type
designation of the product.
The instruction manual for the respective
machine and the safety instructions must have
been complied with.
Damage due to faulty operation cannot be
recognised as a warranty claim.
2.
Correct deployment of the machine
SENCO
products are developed and produced for specific
purposes.
A warranty claim cannot be acknowledged in the
event of failure to comply with the intended use in
accordance with the instruction manual, misuse
or use for another purpose or use of unsuitable
accessories. The warranty does not apply if the
machine is deployed in continuous and piece-
work operation or for rental and hire purposes.
3.
Compliance with servicing intervals
Regular
servicing by us or a servicing and repair firm
authorised by us is prerequisite for warranty
claims. Servicing is specified for when the carbon
brushes are worn, however at least once a year.
The machine must be cleaned in accordance
with the provisions of the instruction manual. All
warranty entitlements expire in case of
intervention/tampering with the machine by third
parties (opening the machine).
Servicing and cleaning work are not generally
covered by the warranty.
4.
Use of original
SENCO
spare parts
Ensure that original
SENCO
spare parts and
SENCO
accessories only are used. They are
available from authorised dealers. The type and
quantity of grease are to be used according to
the valid grease list. Use of non-original parts
can cause consequential damage to the
machine and an increased risk of accidents.
Dismantled, partly dismantled machines and
machines repaired with third party spare parts
are excluded from the warranty.
5.
Wearing parts
Certain components are subject to use-induced
wear or normal wear and tear caused by use of
the respective power tool. These components
include, among other things, carbon brushes,
ball bearings, switches, power cords, seals,
shaft sealing rings. Wearing parts are not
covered by the warranty.
