Senci SC 8000D, Руководство пользователя, Страница: 59 / 68

Generator check
Before starting make sure the switch is on “OFF” position, otherwise can lead damage of generator
WARNING:GENERATOR MUST BE STARTED WITHOUT LOADING!
FUEL PIPE EXHAUSTING SYSTEM
The generator can not starting when the oil is filled it is probably the air has mixed
in the fuel.The way to solve it is close the fuel switch anticlockwise and loosen the
clamp between the fuel pipe and injection pump,then unplug the fuel pipe and
open the fuel switch clockwise till there is no bubble from the fuel.
STARTING OF GENERATOR
Use Air Hearting button when the ambient temperature below 5
degree.Press this button 10 seconds before starting. 4. 1 Recoil start
Recoil start refer to the instruction pictures of next page. Fuel plug
！
NOTIC
：
E When ambient temperature is low, twist the fuel plug on
the cover of the cylinder head and add 2 ml oil,then tighten.
！
NOTICE:THE FUEL PLUG MUST BE TIGHTEN ON THE COVER OF THE
CYLINDER HEAD,OTHERWISE THE DUST OR WATER VAPOUR WILL
BE SUCTION INTO.
Electrical start
( 1) Disconnect all loading equipment ( 2) Put the starting switch in
"OFF" position ( 3) Open the fuel switch in "ON" position ( 4) Put the
operation handle to "RUN" position ( 5) Turn the key clockwise to
"START" position
！
NOTICE:The starting motor can not lasting too long time, otherwise
will burnt the motor and cause voltage drop of the battery
Italia Star Com Due S.R.L.
www.italiastar.ro
info@italiastar.ro
004/021.433.03.27
59