Sena Parani-ESD100V2 Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 61

Sena Parani-ESD100V2 Скачать руководство пользователя страница 36

36

A.1.3. Factory Reset Signal

Factory reset signal will be used for setting the Parani-ESD to factory defaults. Factory reset signal
should be on 0V status for at least 1 second for the reset to occur.

A.1.4. Pairing (BT_MODE) Signal (Single Connection Mode Only)

Parani-ESD  provides  a  pairing  signal  input  for  instant  configuration  and  automatic  connection  to  two
Parani-ESDs.  In  this  example,  we  will  name  the  two  Parani-ESDs  as  ESD1  and  ESD2.  In  pairing
mode.

Step 1.

Turn on ESD1 and ESD2 and do factory default both of them by using RST signal.

Step 2.

Set the pairing signal of ESD1 to a low state and hold the signal for 2 seconds.

Step 3.

Set the pairing signal of ESD2 to a low state and hold the signal for 2 seconds.

Set the pairing signal of ESD2 to high state and hold the signal for 2 seconds. Now Set the pairing
signal of ESD2 to low state and hold it for 2 seconds

Step 4.

Wait for ESD1 & ESD2 to connect to each other. It may take about 10 seconds to make a

connection. If there are many Bluetooth devices nearby, the connection time may increase.

Step 5.

At this point your pair of Parani-ESD is configured to make automatic connection to each other.

You can now use this pair of Parani-

ESD‟s like virtual serial cable.

* Note : During the pairing process, by way of the pairing signal, the Command Response will be

deactivated. Thus, the Parani-ESD will not send the response messages such as OK,
Connect and Disconnect.

Table A-2 Pairing Process by Pairing Signal

ESD1

Status

Pairing Signal

ESD2

Status

Pairing Signal

1. Reset

Mode0

HIGH

1. Reset

Mode0

HIGH

2. Drop pairing
signal

Mode3

LOW

2. Drop pairing signal

Mode3

LOW

3.Restore
pairing signal

Mode3

HIGH

3.Restore
pairing signal

Mode3

HIGH

4. Drop pairing signal

Mode1

LOW

5.Restore
pairing signal

Mode1

HIGH

6. Connected

Slave

HIGH

6. Connected

Master

HIGH

Using pairing button, users can make a pairing connection between a Parani-ESD unit and other
Bluetooth devices.

Step 1.

Turn on ESD1 and do factory default by using RST signal.

Step 2.

Set the pairing signal of ESD1 to a low state and hold the signal for 2 seconds.

Step 3.

Users can discover and connect to ESD1 by using the software or user interface of other

Bluetooth device that they want to connect from.

Step 4.

Wait for ESD1 & other Bluetooth device to connect to each other. It may take about 10

seconds to make a connection. If there are many Bluetooth devices nearby, the connection time
may increase.

Step 5.

Now ESD1 is waiting for a connection from the last connected Bluetooth device. The last

connected Bluetooth device can connect to ESD1.

«
...
34
35
36
37
38
...
»

Содержание Parani-ESD100V2






























































Отзывы:

Нет отзывов