Sena Parani-ESD100V2 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 61

Sena Parani-ESD100V2 Скачать руководство пользователя страница 16

16

Serial port settings can be changed by <Start Configuration> and <ParaniWIN Configuration> of
ParaniWIN in the menu bar at upper left corner of the window without re-running the ParaniWIN
program.

Figure 3-4 Menu Bar at Upper Left corner of ParaniWIN

When the ParaniWin software is able to access the Parani-ESD properly, the icons in the left side
window come will become available for use.

In device configuration window, hardware reset can be executed or operation mode and RS232 can
be configured as well. Security option also can be configured in this window.

Figure 3-5 Device Setting Window

Parani-ESD  supports  two  security  options,  Authentication  and  Encryption.  If  you  check  the
Authentication  option,  you  must  also  enter  the  Pin  Code  value.  If  the  authentication  is  activated,  the
connection, only between the Master and Slave device that share the same Pin Code, is established.
Parani-ESD  supports  two  security  options,  Authentication  and  Encryption.  If  you  enable  the

«
...
14
15
16
17
18
...
»

Содержание Parani-ESD100V2






























































Отзывы:

Нет отзывов