Sena Parani-ESD100V2, Руководство пользователя

Страница: 45 / 61

45
B.3.14. AT+SETESC,nn

Response

OK

Purpose Change the escape sequence character
Description
Escape sequence character set to „+‟ by default is changeable.
The parameter nn must be a printable character.
Example
AT+SETESC,42
B.3.15. ATO

(ATOx, ATObdaddr)
Response None
Purpose
Convert the operation status of „Standby‟ to „Connect‟
Description You
can convert the operation status of „Standby‟ to „Connect‟ ready to transmit data. In
Node Switching mode, a specific slave can be specified to become an active connection by
specifying the connection number or the Bluetooth address.
Example ATO
ATO3
ATO000195000001
B.3.16. AT+BTCANCEL

Response

OK

Purpose
Terminate the current executing task
Description
This terminates a current executing task, such as Inquiry scan and Page scan, then
converts the operation status to „Standby‟
B.3.17. AT+BTSCAN

Response

OK


CONNECT 112233445566

Purpose Wait for inquiry and connection from other Bluetooth devices
Description This allows the inquiry and connection from the other Bluetooth devices. The operation
status will be in „Pending‟ after this command. When connection is made and released, the
operation status is back to „Pending‟. To convert the operation status to „Standby‟
AT+BTCANCEL must be used.
This has the same effect as AT+BTSCAN,3,0.
When connection is made with other Bluetooth device, response will
be „CONNECT‟ with
its BD address.
B.3.18. AT+BTSCAN,n,to

Response

OK


CONNECT 112233445566

or

OK


ERROR

Purpose
Wait for inquiry and connection from other Bluetooth devices for a given duration
Parameters n=1: Allows Inquiry scan
n=2: Allows Page scan