21
5.4 Assembly instructions for BETA-Flex Mini, short splint bar
5. Assembly instructions
TL 160
1-
003
(E
ngl
is
ch)
TL 160
1-
003
(E
ngl
is
ch)
5
1.
Loosen both screws that hold
the two halves of the rotor
casing together by two full
rotations (Torx-key T 10).
2. Then open the rotor casing
from the bottom a gap wide.
3. Pull the bar out of the rotor
casing.
4. In its place, insert the BETA-
Flex Mini.
5. Press the two halves of the
rotor casing together again
firmly and tighten the screws
again.
6. Repeat the process with the other rotor casing.
5
Semeda GmbH Am Petersberg 36 D - 29389 Bad Bodenteich www.semeda.de
1
2
3
4
1
2
3
4
Semeda GmbH Am Petersberg 36 D - 29389 Bad Bodenteich www.semeda.de
1.
Loosen both screws that hold
the two halves of the rotor
casing together by two full
rotations (Torx-key T 10).
2. Then open the rotor casing
from the bottom a gap wide.
3. Pull the bar out of the rotor
casing.
4. In its place, insert the BETA-
Flex Mini.
5. Press the two halves of the
rotor casing together again
firmly and tighten the screws
again.
6. Repeat the process with the other rotor casing.
Inserting the BETA-Flex Mini
Inserting the BETA-Flex Mini