SeMax CDM-810, Руководство пользователя

Страница: 38 / 41

Appendix
A
Command A1 A2
ATH y y Hang up
A1: response OK
A2: Response OK-> NO CARRIER
ATA y y Hook off
+CICB y n Incomming Call Bearer
+VTD, +VTS y y Duration n* 100ms and DTMF tones 0..9,A..D,*,#
+COPS y y Operator selection
ATDL y n Dial last used number, useful
+CSQ y y Field strength
+CREG y y Registration
S-Registers y y A1/A2 SO:Rings to Auto-Answer
Only A2-S2:Escape-Character
Only A2-S3:Carriage Return-Character
Only A2-S4:Line Feed-Character
Only A2-S5:Backspace-Character
Only A2-S12:Escape Code Guard Time
no OK from A2 by AT+SO? ( only Content )
+VGR, +VGT y y Speaker and microphone gain
A1-VGR/VGT 0..255
Values larger 255 are accepted
A2 VGR 0..23 VGT 0..20
+SIDET y n Side tone, A2-MMI implemented, but not as an AT command
+ECHO y n Not working in A1, enough program space in A2 for echo cancellation?
+CGSN y y Serial number
+CGMM y y Model ID
+CGMR y y Software revision
+CGMI y y Manufacturer ID
+GCAP y y capabilites
+CPAS y y Phone activity status
+CPOF y n