SeMax CDM-810, Руководство пользователя

Страница: 14 / 41

CDM-810 Installation and
Connection
Battery Installation (Optional Accessory)
NOTE: The following procedure applies only if a battery is
supplied with your CDM-810; or you purchase a battery in the
future.
Before using or installing the CDM-810, you will need to install the
battery. Procedures follow:
1.
Ensure that nothing is connected to the CDM-810.
2.
Turn the CDM-810 face up.
3.
Remove the battery cover by removing the two screws
located on top of the CDM-810. (See Figure1)
4.
Locate the two pin jack inside the battery compartment and
connect the battery to the CDM-810. (See Figure 2)
5.
Once the battery is connected and installed, install the
battery door and screws.
Screw
Figure 1. - Screw Location
Installation
and
Connection
Figure 2. - Battery Installation