SELMI Filler, Руководство пользователя и обслуживания

Страница: 23 / 34

23
Note
It is recommended that the resistance
temperature is set to about 30 0C.
Insert the mould (1) as shown in the figure.
Press the
“VIBRATOR ON/OFF”
button to
activate the vibrating plate.
Press the
“DOSAGE”
button or the operating
pedal (2) to inject the product into the mould.
Having injected the product, replace the mould and
press once more the
“DOSAGE”
(D) button or the
operating pedal (2).
5.3. End of the working cycle
Once the working cycle is finished the following
will need to be carried out:
Press the
“VIBRATOR ON/OFF” (F)
button to switch off the vibrator.
Press the
“ON/OFF” (A) switch to switch
off the machine.
5.4. Position of the user
During the working cycle a sole operator is
needed located in front of the control panel with
easy access to the emergency button.
5.5. Unintentional power cuts
If the voltage supply were to fail during the
working cycle, a thermostat will prevent the
machine from functioning for about 10/15
minutes (following the resetting procedure) to
allow the machine to return to its working
temperature.
1
2