SELMI Filler, Руководство пользователя и обслуживания

Страница: 14 / 34

14

Safety micro switch
The safety micro switch located inside the electric
panel will cut the power supply when the panel is
opened for maintenance procedures.
Attention
Periodically check that the safety microswitch is
working properly.
If faulty, please proceed immediately with its
replacement.

Fuses
The fuses are located within the electric panel for the
protection of the electrical circuits of the machine. A
possible voltage spike could blow the fuses. When a
fuse blows one should act as follows:
- switch off the machine and disconnect it from the
mains;
- open the electric panel and with the help of a tester
locate the blown fuse. Replace it with a new one of
the same ampere rating
.
Attention
If fuses keep blowing it may be an indication of a
fault of the electrical apparatus, in this case
contact Technical Support.
2
1