SellEton Scales PS-IN202SS, Руководство пользователя

Страница: 9 / 17

PS-IN202SS Indicator
- 8 - V2015.05
Factory
Reset
P16
Normal/Slave
Mode Setting
Set the indicator to be normal or slave mode. “n” means normal; “s”
means slave. Connect the indicator through RS232 with another indicator
to be used an additional display for “slave mode”.
N
√
S
P17
Counting
Mode setting
Activate / deactivate the counting mode. “1” is ON, “0” is OFF
0
1
√
P18
Animal Mode Set the divisions for animal weighing hold function XXd
P19
Accumulation
(SS Only) Set accumulation modes: Automatic or Manual
In Automatic mode, it saves weights automatically when it is stable. Auto
Man
√
2.7 Communication Menu Descriptions
This section provides a more detailed description of the selections found in the User Menu
Chart. Factory-
set defaults are shown in bold with a checkmark (√).
NAME/CODE DESCRIPTION CODE/VALUE
S1
Baud Rate Selects the baud rate for data transmission through the serial port 1200
4800
19200 2400
9600√
S2
Data Bits and
Parity Selects the number of data bits and parity of serial transmission.
"8n" = 8 data bits with no parity bit and one stop bit
"7O" = 7 data bits with odd parity bit and one stop bit
"7E" = 7 data bits with even parity bit and one stop bit
"7n" = 7 data bits with no parity bit and two stop bits 8n
√
7O
7E
7n
S3
Mode of Serial
Transmission Selects when data will be sent out of the serial port to a printer or
computer:
“C” = Continuous Mode; Send Data continuously
“d” = demand mode; send data when a PRINT command is issued from
the printer, computer or indicator C
d√
S4
Display Check Actuates the function that illuminates all digit segments, decimal points,
LCD enunciators in a test sequence. Pressing the
[ZERO] key to scroll
down one level begins the test sequence
Press [ZERO] key to
begin sequence
S5
Disable the
lb/kg Key Allows the lb/kg to be disabled so that an operator cannot accidentally
press the key and change the displayed units.
“0” = Disable the lb/kg key “1” = Enable the lb/kg key 0
1√
S6
Serial Port
Mode Selects the mode of the RS-232 serial port: Refer to Appendix B for
more information
“0” = Full Duplex Mode
“1” = Print Ticket Mode 0
1√
S7
ID No. Enable Allows the ID number to be disabled in the Print Ticket Mode. Valid only
when
S6
is set to “1”
“0” = Disable the ID No. “1” = Enable the ID No.
0√
1
S8
ID No. Entry Actuates the function that allows entry of a new ID No. Valid only when
S6
is set to “1”. Pressing the
[ZERO] key to scroll down one level begins
the sequence.
0 - 999999
123456√