Open Roll Installation Instructions
MAINTENANCE & CARE
FABRIC ADJUSTMENT
If telescoping occurs, roll your shade down a few inches
pass the window sill and place tape on the fabric as
close to the top as possible on the side you want to bring
down. Repeat this process as many times as necessary by
layering the tape.
Fabrics can be periodically dusted using a soft cloth,
feather duster, or vacuum cleaner with brush attachment.
If staining does occur, most fabrics can be cleaned using
a soft cloth with water or a mild soap detergent. Any
detergent or cleaning product should be tested on a small
area prior to cleaning the fabric. Do NOT use abrasives or
harsh cleansers as they can damage the fabric. Dab with
a cloth or towel to prevent water spots and roll shade
down to the window sill to allow the fabric to air-dry.
STRANGULATION HAZARD:
Young children can be
strangled by cords. Immediately remove this product
if a cord longer than 22cm or a loop exceeding 44cm
around becomes accessible.
WARNING
For french installation instructions, scan the QR code.
This device
MUST
be properly installed in accordance with Health Canada regulations on corded window covering
products. Fasten P-Clip against the window frame or wall. Position the P-Clip so it does not interfere with the travel
of the shade. Chain should be tight, but not under stress when adhered to the P-Clip. Fasten the P-Clip using screws
provided.
Do not twist the chain. ChainGuard will rest on P-Clip.
To operate the chain
slide ChainGuard up, exposing the bottom of the chain. Use the exposed chain to raise or lower
your shade accordingly. Release the ChainGuard to conceal the chain.
CHILD/SAFETY CHAIN TENSIONER INSTALLATION
STEP 4 - APPLIES TO CHAIN OPERATION ONLY
4
©2022 Select Blinds
Open Roll Installation Instructions |
