INSTRUCTIONS MANUAL
CODE 80381 REV C
12/2020
Pag.: 25
J
.P. SELECTA s.a.u.
Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España
Tel 34 937 700 877 Fax 34 937 702 362
e-mail:[email protected] - web site: www.jpselecta.es
PROGRAMMING
Go to PROGRAMMING screen to:
• Set the temperature profiles.
• Set the timed operation for a profile.
(For instance, you can set a time and a week day to start a profile.
F.i.: start, profile n
er
1 on Sunday at 19h00’)
Programming a temperature profile
A temperature profile is a sequence of a maximum of 6 steps, also
called dells.
Profile parameters input:
• Select the profile number with
between 0 and 10.
• Press on the parameter to be modified (Temp, length ...)
• Press on these icons:
to enter the value.
• Modify another parameter.
Special values:
• If you enter
INF
in
Step length
, the cabinet remains permanently
at this temperature.
Starting of temperature profile:
• To set the profile starting time, press on «—:—»
• Enter time by pressing
in
hh:mm
format.
• Press on the week days when the profile should be run.
• Accept the programming by pressing on
.
profile
numb
1-10
Segment
temperature
ºC
step
duration
hh:mm
Profile
start
