MANUAL DE INSTRUCCIONES
CÓDIGO 80381 REV C
12/2020
Pag.: 22
J
.P. SELECTA s.a.u.
Ctra. NII Km 585.1 Abrera 08630 (Barcelona) España
Tel 34 937 700 877 Fax 34 937 702 362
e-mail:[email protected] - web site: www.jpselecta.es
Set time and date
Press on the time/date. Press successively on the box to select the
days, months, years, minutes, seconds adjustment.
Adjust by pressing on the icons to increase and decrease.
Control
With a value of the appropriate P, I, D parameters, the cabinet will reach
the temperature in the shortest possible time and without exceeding
the set temperature. However, those values can be quite different at
high and low temperatures.
These values can be modified, but it’s advisable to perform an «Auto
-
tunning» when you need a better accuracy.
«Autotunning» automatically adjusts the optimal parameters for a
given temperature and load. Do not manipulate the equipment during
the process.
Press on the Control menu. Press successively on the box to select
the P, I, D values adjustment and modify the value by pressing on the
increase and decrease icons.
Attention
: It is recommended to use «
Autotunning
» option to au-
tomatically adjust these values, instead of modifying them manually.
Press on the Control menu.
Select the «Autotunning» temperature with:
(it is recommended to set the most used temperature). There are two
calculation methods that are identified with 100 or with 40. The 100
method has a slower duration, but it is more accurate. For most appli
-
cations, 40 method is more than enough.
Start «Autotunning» by pressing on the icon
If for some reason you want to stop, press on:
Setting screen
Icons meaning:
Date/Time
Control
Logs
Temperature
Units
Language (Spanish, English,
French)
Reject change
Validate change
Up/Down
