Seko SAM 5-ME, Инструкция по эксплуатации и обслуживанию

Страница: 24 / 46

17
22) Reverse rotation light ( 22 Fig. 13)
Light is on by pressing the p. button for reverse motor and
indicates the augers inverted rotation ( 24 Fig. 13 ).
23) Push button for left side discharge door closed
( 23 Fig. 13)
By pressing this button the discharge door will start
closing (Fig. 26). The light in the button is on proving that
door is closing. The p. button is without clutch and
therefore it tends to go back when it is released and the
discharge door maintain the position.
24) Push button for reverse rotaion ( 24 Fig. 13)
This button starts rotation of the augers as shown in
picture (Fig. 24) (i.e. rotation direction contrary to normal
working rotation). To stop the augers reverse rotation you
must press p. button n. 8 Fig. 13.
25) Push button for left side discharge door
opened ( 25 Fig. 13)
By pressing this p. button the discharge door will start to
open (Fig. 27). The light in the button is on proving that
door is opening. The p. button is without clutch and
therefore it tends to go back when it is released and the
discharge door maintain the position.
26) Stop push button for right side conveyor
rotation ( 26 Fig. 13)
By pressing this p. button, the push buttons ( 27 – 28 Fig.
13 ) are disactivated. In case of necessity of conveyor’s
inverted rotation direction, before pressing the pertaining
button, you first must press the stop button and wait until
the conveyor is in still position.
27) Push button fro right side conveyor direct
rotation ( 27 Fig. 13)
By pressing this p. button we can activate the rotation of
the discharge conveyor in rotation direction as shown in
(Fig. 25). To disingage operation press button (26 Fig.
13).
Fig. 24
Fig. 25
Fig. 26
Fig. 27