![Seko PoolDose ORP Скачать руководство пользователя страница 7](http://html.mh-extra.com/html/seko/pooldose-orp/pooldose-orp_instruction-manual_1236263007.webp)
PoolDose | pH · ORP
0000138981
rev. 1.0 EN
5
Save and exit Program setup
– Press
Pressing the
key determines the exit from the programming menu with saving of the parameters, if the
parameter of the menu item in which one is in has not been changed when pressing the
key.
Set Point adjustment
Press the
button for 3 seconds, use
and
to set the desired value.
Stand-by mode (backlight on)
Press
and
buttons simultaneously for 5 seconds to switch off the unit backlight. Dosage and
calibration are disabled. To exit standby, press
and
buttons simultaneously.
Priming
Only while the pump is in stand-by press down
and
in the same time.
Flowrate counter reset
To reset value of "Partial Totalizer" press
button for 3 seconds, in stand-by mode only.
OFA reset
Press the
esc button for one click, reset countdown value.
Offset/Slope Menu
Press
and
buttons the unit show Offset/Slope calibration value, press
or
to scroll the
menu.
Note
: Timeout setting menu, after 120 seconds without action the controller escape itself without saving parameters.
Display example:
7.2pH
32
°
C
LEV
Ta 2546m
3
Alarm list
-
Circ. Pump OFF
-
LEV
-
WDG
-
OFA1 & OFA2
-
Stand By
-
Flow
-
NO WiFi
Flow water totalizer
Absolut
Resettable
Temperature measure
pH measure
720 mV
32
°
C
LEV
Ta 2546m
3
ORP measure
Flow water totalizer
Absolut
Resettable
Temperature measure
Alarm list
-
Circ. Pump OFF
-
LEV
-
WDG
-
OFA1 & OFA2
-
Stand By
-
Flow
-
NO WiFi
Содержание PoolDose ORP
Страница 2: ...0000138981 Rev 1 0 ...