manualshive.com logo in svg

Sejoy HB-202, Руководство владельца

Поделиться
Скачать
Sejoy HB-202 Скачать руководство пользователя страница 46

FCC Warnning:

Any Changes or modifications not expressly approved by the par ty 
responsible for compliance could void the user's authority to operate 
the equipment.
This device complies with par t 15 of the FCC Rules. Operation is 
subject to the following two conditions: 
(1) This device may not cause harmful inter ference, and 
(2) this device must accept any inter ference received, including 
inter ference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the 
limits for a Class B digital device, pursuant to par t 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against 
harmful inter ference in a residential installation. This equipment 
generates uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause 
harmful inter ference to radio communications. However, there is no 
guarantee that inter ference will not occur in a par ticular installation. 
If this equipment does cause harmful inter ference to radio or television 
reception, which can be determined by turning the equipment off and on, 
the user is encouraged to try to correct the inter ference by one or more
 of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to 
 which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure 
 requirement.
 The device can be used in por table exposure condition without
 restriction.  

Содержание HB-202
















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды