manualshive.com logo in svg

Sejoy HB-202, Руководство владельца

Поделиться
Скачать
Sejoy HB-202 Скачать руководство пользователя страница 3

Introduction

Thank you for choosing Sejoy HB-202 Hemoglobin Testing System.
Before you start testing, carefully read this 

Owner’s Booklet

.

Intended  Use

Test Principle

The system consists of a portable meter that analyzes the intensity and 
color of light reflected from the reagent area of a test strip, ensuring quick and 
accurate results.

®

The Sejoy  Hb Hemoglobin Testing System provides results in less than 15 
seconds and requires only a single drop of whole blood. The meter can store
 up to 1000 results. The meter can be operated by 3 AAA (1.5V) batteries.

1

        The Sejoy HB-202 hemoglobin Meters are used with the Sejoy HS-101 
Test Strips to quantitative measuring hemoglobin content with fresh capillary 
wholeblood from the finger or venous blood. The hemoglobin Meters can be 
used for self-testing at home or for professional use.The product is for in
vitro diagnostic use only.It can not be used as the only basis for the diagnosis
of anemia.

To ensure accurate results:

• Read instructions and complete any necessary training before use.

•

 Use the code chip that accompanies each box of test strips.

®

®

•

 Use only Sejoy  Hb Hemoglobin Test Strips with the Sejoy  Hb 

     Hemoglobin Meter. 

•

 For in vitro diagnostic use only.

•

 Test only whole blood specimens. EDTA or heparin 

 anticoagulants

sodium

     can be used. 

•

 Keep out of reach of children.

Содержание HB-202
















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды