background image

Getting

 

to

 

know

 

your

 

system

  removing it from the vial or inserting it into the meter.
• Do not use test strips beyond the expiration date. This may cause
  inaccurate results.
• Do not bend, cut, or alter test strips.

Warning: The cap or vial contains drying agents that may be 
harmful if inhaled or swallowed and may cause skin or eye
irritation.

• After removing a test strip from the vial, immediately  close the vial cap
  tightly.
• With clean, dry hands, you may touch the test strip anywhere when 

• Write the first open date and expiration date on the vial label 
  when you first open it. Discard the vial 3 months after first open
  date. Usage after this period may result in inaccurate readings.
• For in vitro diagnostic use. Test strips are to be used only outside 
   the body for testing purposes. 
• Do not use test strips that are torn, bent, or damaged in any way. 
  Do not reuse test strips. 
• Before per forming a hemoglobin test, make sure that the code 
  number on the meter display matches the number shown on the 
  test strip vial and on the code chip ink-jet printed. 

10

Содержание HB-202
















































Отзывы: