manualshive.com logo in svg

Seiwa BB 200, Руководство пользователя


Поделиться
Скачать
background image

27

User Manual

3.1.12.1 Shallow Water

Triggers an alarm when depth becomes shallower than the value set.

3.1.12.2 Deep Water

Triggers an alarm when depth becomes deeper than the value set.

3.1.12.3 High Water Temp

Triggers an alarm when the transducer reports a temperature (from TEMP 1 sen-

sor) above the value set.

3.1.12.4 Low Water Temp

Triggers an alarm when the transducer reports a temperature (from TEMP 1 sen-

sor) below the value set.

3.1.12.5 Water Temp Rate

Triggers an alarm when the transducer reports a temperature (from TEMP 1 sen-

sor) variation rate above the value set.

3.1.12.6 Fish Alarm

The options for Fish Alarm set the size of the fishes that, if detected by the unit,

switches an alarm to sound. These options are: Off, Small, Medium, Big and

Huge. The alarm sounds if the set size (or bigger) is detected.

3.1.13

Save & Load

Insert the USER MEDIA into the slot, then follow the procedure:

[MENU] + "Save & Load" + [ENTER]

Fig. 3.1.13  -  Fish Finder Save & Load menu

3.1.13.1 Load Settings from User Media

Load the complete settings from the UER MEDIA and changes the active menu

settings.

3.1.13.2 Save Settings to User Media

This is useful to avoid the user havin to retune up Fish Finder after a Clear RAM

operation or a software update.

3.1.13.3 Restore Current Preset Defaults

Restors the default values only for the current presets (see Par. 3.1.1, Preset

Mode) and does not affect the other presets.

Содержание BB 200









































Отзывы:

Нет отзывов

Похожие инструкции для BB 200

Бренды по названию

Популярные бренды

Загрузить еще бренды