background image

52

ASTRON  8X42  GPS SOLAR

          

TROUBLESHOOTING

7

At trouble

Possible causes

Solutions

Reference 

pages

GPS signal 

reception

The reception result is 
displayed as “Y,” but the 
time and date are gained 
or lost (when the reception 
result of time zone 
adjustment is displayed)

DST (Daylight Saving Time) setting does not correspond 
to the addition conditions of DST (Daylight Saving 
Time).

Check DST (Daylight Saving Time) setting.

P. 21

The position of the hands is misaligned due to external 
factors.
The preliminary position of the hands is misaligned.

 Preliminary position  

P. 44

 <Hour/minute hand misalignment> The automatic hand position adjustment 

function is activated to automatically adjust the positions.  Please use the 
watch as it is. The automatic hand position alignment function is activated 
once a minute for the second hand and at 12:00 AM and PM for the hour and 
minute hands.

  <Date misalignment> Since the preliminary position is not automatically 

adjusted, manually adjust the position.

 When misalignment of the hand is not adjusted, refer to the “Adjust the 

preliminary position of the sub dial, date, indicator hand, and hour/minute 
hands” to carry out operation.

 When misalignment of the hand is not adjusted even with operation of 

consult the retailer from whom the watch was purchased.

P. 44

P. 45

The reception result is 
displayed as “Y,” but the 
time is gained or lost by 
one to two seconds.

The automatic time adjustment function has not been 
activated for a few days.

If the energy stored in the watch is insufficient, the automatic time adjustment 
function may be activated once in 3 days.

P. 27

The automatic time 
adjustment function is not 
activated every day

Conditions to activate the automatic time adjustment 
function are not prepared.

Sufficient energy is necessary to activate the automatic time adjustment 
function. The time adjustment function is automatically activated by exposure 
to bright light.

P. 27

Automatic reception is not 
activated.

The watch is not in an environment where GPS signals 
can be received at the moment when light is exposed.

Cancel the function that reception is automatically started by light so that the 
watch only carries out the fixed time reception. The fixed time in this case 
means the last time when manual time adjustment was successful.
<How to turn the automatic light reception function on or off>
1.  Continue to press Buttons A and B simultaneously (3 seconds)
  The second hand indicates ON or OFF of the function, Y (8-second position: 

ON) and N (22-second position: OFF).

2.  Continue to press Button A (3 seconds) to turn the function on/off. 

P. 49

Содержание SSE153J1




























































Отзывы: