background image

29

ASTRON  8X42  GPS SOLAR

          

BASIC OPERATION (HOW TO SET THE TIME/HOW TO RECEIVE GPS SIGNALS, ETC.)

4

Leap second (Automatic leap second reception function)

 Receiving Leap Second Data

When the GPS signal reception is performed on or 

after December 1st and June 1st, the indicator hand 

displays as shown at the right.

When the leap second data reception is completed, 

the indicator hand returns to display the charging 

status.  Use the watch as it is. 

 The leap second data reception is performed every half a year regardless of leap second addition.

It takes up to 18 minutes to receive the leap second data.

 Leap second

The leap second is to compensate for deviations from the universal 

time (UT) which is astronomically determined and the “International 

Atomic Time  (TAI).

“1 second” may be added (deleted) once a year or every few years.

 Automatic leap second reception function

A leap second is automatically added by receiving “leap second 

data” from GPS signals at the time of leap second addition (delete).

 “Leap second data” includes information about future leap second addition and current 

leap second data.

When GPS signals are received under the following conditions, the leap second 
data reception is also started.

• GPS signals are received after the system reset
• GPS signals have not been received for a long time
• Leap second data reception has failed

  (Leap second data reception is performed again during the next GPS signal reception.  It is repeated 

until the leap second data reception is successful.)

Receiving the leap second data

Содержание SSE153J1




























































Отзывы: