background image

53

ASTRON  8X42  GPS SOLAR

          

TROUBLESHOOTING

7

At trouble

Possible causes

Solutions

Reference 

pages

Misalignment 

of time and 

hands

The position of the second 
hand showing “reception 
result” and “number of 
acquired satellites from 
which GPS signals are 
received” is misaligned.

The preliminary position of the second hand is 
misaligned.  (This occurs when the position of the 
second hand is misaligned due to external factors.)

 Preliminary position 

P. 45

 The automatic hand position alignment function is activated to automatically 

adjust the position.  Please use the watch as it is. The automatic hand 
position alignment function is activated once a minute for the second hand.

 When misalignment of the hand is not adjusted even with operation of 

consult the retailer from whom the watch was purchased.

P. 44

The watch temporarily 
gains or loses time.

The automatic time adjustment function has not been 
activated for a few days. 

If the energy stored in the watch is insufficient, the automatic time adjustment 
function may be activated once in 3 days.
To adjust the time immediately, carry out “manual time adjustment.”

P. 27

P. 26

The watch received an incorrect time due to external 
factors (erroneous reception).

 Receive GPS signals in a place where GPS signals can be more easily 

received.

 Adjust the time zone as necessary.

P. 16
P. 18

The watch is left in an extremely high or low 
temperature place for a long time.

 If the watch is returned to a normal temperature place, the accuracy will be 

recovered.

 If the time is incorrect after that, manually adjust the time as necessary.

 If the watch is not recovered, consult the retailer from whom the watch was 

purchased.

P. 26

The time is gained (lost)  
1 hour

DST (Daylight Saving Time) is ON (or OFF).

Check DST (Daylight Saving Time) setting.

P. 21

Содержание SSE153J1




























































Отзывы: