Rotate the crown to adjust the indicator
hand as shown in the figure.
Set the time by
receiving GPS signals.
9
Press Button A and then
release it.
10
13
48
ASTRON 8X53 GPS SOLAR
TROUBLESHOOTING
CONTENTS
7
Continue to press
Button B (three
seconds).
11
The hour/minute hands
move, and stop at “12:00
am.”
The second hand
stops at the 0-second
position.
After operation of
①
to
⑫
is completed, make
sure to set the time.
When you are in a place
where GPS signals cannot
be received
①
Carry out manual time zone
setting
How to manually set the time
zone
P.23
②
Manually set the time
How to manually set the time
P.44
When the time is set,
operation is completed.
When you are in a place where
GPS signals can be easily
received, adjust the time zone.
How to adjust the time zone
P. 18
Push the crown back
in.
12
The watch exits the mode
to adjust the preliminary
position, and the second
hand and the hour/minute
hands start moving.
Adjust the indicator hand to the position as
shown in the figure.
If the indicator hand points as shown in the figure,
go to operation of
⑩
.
The indicator hand makes one complete turn, but
this does not mean a failure.
Turn the crown
quickly to move
it continuously.
Turn the crown
again to stop.
Turn the crown
clockwise to
advance 1 step.
Turn the crown
counterclockwise
to set back 1 step.
The watch goes into the
preliminary position setting
mode of the hour and
minute hands.
Press and
then
release
Press
Button B
for three
seconds
0 1 2
Push the
crown
back in