Seiko SSE055J1 Скачать руководство пользователя

Страница: 41 / 58

ASTRON 8X53 GPS SOLAR

TO PRESERVE THE QUALITY OF YOUR WATCH

CONTENTS

Power Source

The battery used in this watch is a special secondary battery,

which is different from ordinary batteries. Unlike an ordinary silver

oxide battery, the secondary battery does not require periodic

replacement.

The capacity or charging efficiency may gradually lower due to

long-term use or operating environment. In addition, long-term

use may shorten the charge duration due to wear, contamination,

lubricant deterioration of mechanical parts, etc. Request repair

when the performance lowers.



Overcharge prevention function

When the secondary battery is fully charged, the overcharge

prevention function is automatically activated to avoid further

charging. There is no need to worry about damage caused by

overcharging no matter how much the secondary battery is charged

in excess of the "time required for fully charging the watch".



Refer to "Standard charging time" on page 14 to check the time required for fully

charging the watch.



When the watch has not been charged for a long time

If the watch has not been charged for a long time, the watch will be

completely discharged and no longer able to be charged.

In this case, consult the retailer from whom the watch was

purchased.

WARNING

Notes on replacing the second battery

• Do not remove the secondary battery from the watch.
Replacement of the secondary battery requires professional

knowledge and skill. Please ask the retailer from whom the

watch was purchased for replacement of the secondary battery.

• Installation of an ordinary silver oxide battery can generate

heat that can cause bursting and ignition.

Notes on charging the watch

• When charging the watch, do not place the watch in close

proximity to an intense light source such as lighting

equipment for photography, spotlights or incandescent lights,

as the watch may be excessively heated resulting in damage to

its internal parts.

• When charging the watch by exposure to direct sunlight,

avoid places that easily reach high temperatures, such as a car

dashboard.

• Always keep the watch temperature under 60°C (140 ºF).

WARNING

Содержание SSE055J1



























































Результаты поиска

Содержание SSE055J1

Отзывы:

Похожие инструкции для SSE055J1

Бренды по названию

Популярные бренды

Seiko SSE055J1, Полное руководство пользователя

Результаты поиска

Содержание SSE055J1

Отзывы:

Похожие инструкции для SSE055J1

Бренды по названию

Популярные бренды