background image

31

ASTRON  8X53  GPS SOLAR

          

BASIC OPERATION (HOW TO SET THE TIME/HOW TO RECEIVE GPS SIGNALS, ETC.)

CONTENTS

Press and 

then 

release

4

Press Button A and then release it while the result of the 

reception is displayed (for 5 seconds) in step 2 

3

Second hand: Reception result  
(successful / failed)

The second hand and indicator 
hand display the reception result.

The second hand displays the result of the GPS signal 
reception (time adjustment or time zone adjustment).
The indicator hand points to “1” or “4+” which shows 
“time adjustment” or “time zone adjustment”.

The second hand displays the 
result of the leap second data 
reception (successful / failed). 
The indicator hand displays “0” of 
the leap second data reception. 

Press Button A and then  

release it

The result of the reception is displayed

1

2

 Check the leap second data reception was successful

The reception result (success or failure) of the regular leap second data reception is displayed for 5 seconds.

Result

Successful

Failed

Display

Position

Y 8-second 

position

N 22-second 

position

When the leap second data reception 
result is Y (successful)

The leap second data reception was 

successful. 

  Use the watch as it is.

When the leap second data reception 
result is N (failed)

The leap second data reception, 

periodically performed, has not been 

successful. 

  It will be performed automatically 

with the next GPS signal reception 

(automatic time adjustment/manual 

time adjustment). 

  Use the watch as it is.

 The leap second data is received on or after 

December 1

st

 and June 1

st

.

 Even when the leap second data reception has 

not been successful, the time is correct until 

the leap second data is added (deleted). 

 The indicator hand points to “4+” as a result of time zone adjustment.

Second hand: Reception result (successful / failed)

Result

Successful

Failed

Display

Position

Y 8-second 

position

N 22-second 

position

 After 5 seconds have elapsed or when Button B is 

pressed, the watch returns to the time display mode.

Press and 

then 

release

 When Button A is kept pressed, 

the watch enters the Manual time 
adjustment operation.

 After 5 seconds have elapsed, or when 

Button B is pressed, the watch returns 
to the time display mode. 

 When Button A is kept pressed, 

the watch enters the Manual time 
adjustment operation.

Содержание SSE055J1



























































Отзывы: