background image

33

ASTRON  8X53  GPS SOLAR

          

CONTENTS

IN CASE OF AN UNUSUAL MOVEMENT OF THE SECOND HAND

5

Power Save 1

Power Save 2

State

The second hand stops pointing at the 
15-second position. 

The second hand stops pointing at the 
45-second position. 

Restriction 

on function/

display

•  The hour hand, minute hand and date stop.

•  Automatic time adjustment is not performed.

•  The hour hand, minute hand and date stop.

  (Date displays “1”.)

•  Reception is not started even with operation 

of GPS signal reception.

•  Automatic time adjustment is not performed. 

•  The indicator hand points to low position. 

Cause

When the watch is exposed to a state without 

receiving an adequate light source for 72 

hours or longer.

When the watch is in an insufficient charging 

state for a long time.

Solution

When the watch is exposed to an adequate 

light source for more than 5 seconds, or when 

any button is pressed, it displays the current 

time again after the second hand is rapidly 

advanced.

(1) Charge the watch sufficiently until the 

charging status is displayed as the middle 

position or full position. 

 

P. 13 ~ 14

(2) Carry out time zone adjustment to set the 

time. 

 

P. 17 ~ 18

Power Save 2

 While the watch is being charged, the second hand moves at “5-second intervals”. During the “5-second Interval Movement,” the buttons cannot be operated.

 If the “ Power Save 2” mode is prolonged, the stored power amount drops and the internal current time information stored will be lost.

 The second hand stops at the 15-second position/ 

45-second position (Power save function)

When the watch is not exposed to light for a long time, the power save function will work.

Содержание SSE055J1



























































Отзывы: